PsfMatchConfigAL¶

class lsst.ip.diffim.PsfMatchConfigAL¶

Bases: lsst.ip.diffim.PsfMatchConfig

!The parameters specific to the “Alard-Lupton” (sum-of-Gaussian) Psf-matching basis

Attributes Summary

`afwBackgroundConfig`	Controlling the Afw background fitting (`SubtractBackgroundConfig`, default `<class 'lsst.meas.algorithms.subtractBackground.SubtractBackgroundConfig'>`)
`alardDegGauss`	Polynomial order of spatial modification of Gaussians.
`alardDegGaussDeconv`	Degree of spatial modification of ALL gaussians in AL basis during deconvolution (`int`, default `3`)
`alardGaussBeta`	Default scale factor between Gaussian sigmas (`float`, default `2.0`)
`alardMinSig`	Minimum Sigma (pixels) for Gaussians (`float`, default `0.7`)
`alardMinSigDeconv`	Minimum Sigma (pixels) for Gaussians during deconvolution; make smaller than alardMinSig as this is only indirectly used (`float`, default `0.4`)
`alardNGauss`	Number of Gaussians in alard-lupton basis (`int`, default `3`)
`alardNGaussDeconv`	Number of Gaussians in AL basis during deconvolution (`int`, default `3`)
`alardSigGauss`	Sigma in pixels of Gaussians (FWHM = 2.35 sigma).
`badMaskPlanes`	Mask planes to ignore when calculating diffim statistics Options: NO_DATA EDGE SAT BAD CR INTRP (`List`, default `('NO_DATA', 'EDGE', 'SAT')`)
`calculateKernelUncertainty`	Calculate kernel and background uncertainties for each kernel candidate? This comes from the inverse of the covariance matrix.
`candidateCoreRadius`	Radius for calculation of stats in ‘core’ of KernelCandidate diffim.
`candidateResidualMeanMax`	Rejects KernelCandidates yielding bad difference image quality.
`candidateResidualStdMax`	Rejects KernelCandidates yielding bad difference image quality.
`checkConditionNumber`	Test for maximum condition number when inverting a kernel matrix.
`conditionNumberType`	Use singular values (SVD) or eigen values (EIGENVALUE) to determine condition number (`str`, default `'EIGENVALUE'`)
`constantVarianceWeighting`	Use constant variance weighting in single kernel fitting? In some cases this is better for bright star residuals.
`detectionConfig`	Controlling the detection of sources for kernel building (`DetectionConfig`, default `<class 'lsst.ip.diffim.psfMatch.DetectionConfig'>`)
`fitForBackground`	Include terms (including kernel cross terms) for background in ip_diffim (`bool`, default `False`)
`iterateSingleKernel`	Remake KernelCandidate using better variance estimate after first pass? Primarily useful when convolving a single-depth image, otherwise not necessary.
`kernelBasisSet`	Type of basis set for PSF matching kernel.
`kernelSize`	Number of rows/columns in the convolution kernel; should be odd-valued.
`kernelSizeFwhmScaling`	How much to scale the kernel size based on the largest AL Sigma (`float`, default `6.0`)
`kernelSizeMax`	Maximum Kernel Size (`int`, default `35`)
`kernelSizeMin`	Minimum Kernel Size (`int`, default `21`)
`kernelSumClipping`	Do sigma clipping on the ensemble of kernel sums (`bool`, default `True`)
`maxConditionNumber`	Maximum condition number for a well conditioned matrix (`float`, default `50000000.0`)
`maxKsumSigma`	Maximum allowed sigma for outliers from kernel sum distribution.
`maxSpatialConditionNumber`	Maximum condition number for a well conditioned spatial matrix (`float`, default `10000000000.0`)
`maxSpatialIterations`	Maximum number of iterations for rejecting bad KernelCandidates in spatial fitting (`int`, default `3`)
`nStarPerCell`	Number of KernelCandidates in each SpatialCell to use in the spatial fitting (`int`, default `3`)
`numPrincipalComponents`	Number of principal components to use for Pca basis, including the mean kernel if requested.
`scaleByFwhm`	Scale kernelSize, alardGaussians by input Fwhm (`bool`, default `True`)
`singleKernelClipping`	Do sigma clipping on each raw kernel candidate (`bool`, default `True`)
`sizeCellX`	Size (rows) in pixels of each SpatialCell for spatial modeling (`int`, default `128`)
`sizeCellY`	Size (columns) in pixels of each SpatialCell for spatial modeling (`int`, default `128`)
`spatialBgOrder`	Spatial order of differential background variation (`int`, default `1`)
`spatialKernelClipping`	Do sigma clipping after building the spatial model (`bool`, default `True`)
`spatialKernelOrder`	Spatial order of convolution kernel variation (`int`, default `2`)
`spatialModelType`	Type of spatial functions for kernel and background (`str`, default `'chebyshev1'`)
`subtractMeanForPca`	Subtract off the mean feature before doing the Pca (`bool`, default `True`)
`useAfwBackground`	Use afw background subtraction instead of ip_diffim (`bool`, default `False`)
`useBicForKernelBasis`	Use Bayesian Information Criterion to select the number of bases going into the kernel (`bool`, default `False`)
`useCoreStats`	Use the core of the footprint for the quality statistics, instead of the entire footprint.
`usePcaForSpatialKernel`	Use Pca to reduce the dimensionality of the kernel basis sets.
`warpingConfig`	Config for warping exposures to a common alignment (`WarperConfig`, default `<class 'lsst.afw.math.warper.WarperConfig'>`)

Methods Summary

setDefaults() Derived config classes that must compute defaults rather than using the Field defaults should do so here.

Attributes Documentation

afwBackgroundConfig¶: Controlling the Afw background fitting (SubtractBackgroundConfig, default <class 'lsst.meas.algorithms.subtractBackground.SubtractBackgroundConfig'>)

alardDegGauss¶: Polynomial order of spatial modification of Gaussians. Must in number equal alardNGauss (List, default (4, 2, 2))

alardDegGaussDeconv¶: Degree of spatial modification of ALL gaussians in AL basis during deconvolution (int, default 3)

alardGaussBeta¶: Default scale factor between Gaussian sigmas (float, default 2.0)

alardMinSig¶: Minimum Sigma (pixels) for Gaussians (float, default 0.7)

alardMinSigDeconv¶: Minimum Sigma (pixels) for Gaussians during deconvolution; make smaller than alardMinSig as this is only indirectly used (float, default 0.4)

alardNGauss¶: Number of Gaussians in alard-lupton basis (int, default 3)

alardNGaussDeconv¶: Number of Gaussians in AL basis during deconvolution (int, default 3)

alardSigGauss¶: Sigma in pixels of Gaussians (FWHM = 2.35 sigma). Must in number equal alardNGauss (List, default (0.7, 1.5, 3.0))

badMaskPlanes¶: Mask planes to ignore when calculating diffim statistics Options: NO_DATA EDGE SAT BAD CR INTRP (List, default ('NO_DATA', 'EDGE', 'SAT'))

calculateKernelUncertainty¶: Calculate kernel and background uncertainties for each kernel candidate? This comes from the inverse of the covariance matrix. Warning: regularization can cause problems for this step. (bool, default False)

candidateCoreRadius¶: Radius for calculation of stats in ‘core’ of KernelCandidate diffim. Total number of pixels used will be (2*radius)**2. This is used both for ‘core’ diffim quality as well as ranking of KernelCandidates by their total flux in this core (int, default 3)

candidateResidualMeanMax¶: Rejects KernelCandidates yielding bad difference image quality. Used by BuildSingleKernelVisitor, AssessSpatialKernelVisitor. Represents average over pixels of (image/sqrt(variance)). (float, default 0.25)

candidateResidualStdMax¶: Rejects KernelCandidates yielding bad difference image quality. Used by BuildSingleKernelVisitor, AssessSpatialKernelVisitor. Represents stddev over pixels of (image/sqrt(variance)). (float, default 1.5)

checkConditionNumber¶: Test for maximum condition number when inverting a kernel matrix. Anything above maxConditionNumber is not used and the candidate is set as BAD. Also used to truncate inverse matrix in estimateBiasedRisk. However, if you are doing any deconvolution you will want to turn this off, or use a large maxConditionNumber (bool, default False)

conditionNumberType¶

Use singular values (SVD) or eigen values (EIGENVALUE) to determine condition number (str, default 'EIGENVALUE')

Allowed values:

'SVD': Use singular values
'EIGENVALUE': Use eigen values (faster)
'None': Field is optional

constantVarianceWeighting¶: Use constant variance weighting in single kernel fitting? In some cases this is better for bright star residuals. (bool, default True)

detectionConfig¶: Controlling the detection of sources for kernel building (DetectionConfig, default <class 'lsst.ip.diffim.psfMatch.DetectionConfig'>)

fitForBackground¶: Include terms (including kernel cross terms) for background in ip_diffim (bool, default False)

iterateSingleKernel¶: Remake KernelCandidate using better variance estimate after first pass? Primarily useful when convolving a single-depth image, otherwise not necessary. (bool, default False)

kernelBasisSet¶

Type of basis set for PSF matching kernel. (str, default 'alard-lupton')

Allowed values:

'alard-lupton'

Alard-Lupton sum-of-gaussians basis set,

The first term has no spatial variation
The kernel sum is conserved
You may want to turn off ‘usePcaForSpatialKernel’

'delta-function'

Delta-function kernel basis set,

You may enable the option useRegularization
You should seriously consider usePcaForSpatialKernel, which will also enable kernel sum conservation for the delta function kernels

'None'

Field is optional

kernelSize¶: Number of rows/columns in the convolution kernel; should be odd-valued. Modified by kernelSizeFwhmScaling if scaleByFwhm = true (int, default 21)

kernelSizeFwhmScaling¶: How much to scale the kernel size based on the largest AL Sigma (float, default 6.0)

kernelSizeMax¶: Maximum Kernel Size (int, default 35)

kernelSizeMin¶: Minimum Kernel Size (int, default 21)

kernelSumClipping¶: Do sigma clipping on the ensemble of kernel sums (bool, default True)

maxConditionNumber¶: Maximum condition number for a well conditioned matrix (float, default 50000000.0)

maxKsumSigma¶: Maximum allowed sigma for outliers from kernel sum distribution. Used to reject variable objects from the kernel model (float, default 3.0)

maxSpatialConditionNumber¶: Maximum condition number for a well conditioned spatial matrix (float, default 10000000000.0)

maxSpatialIterations¶: Maximum number of iterations for rejecting bad KernelCandidates in spatial fitting (int, default 3)

nStarPerCell¶: Number of KernelCandidates in each SpatialCell to use in the spatial fitting (int, default 3)

numPrincipalComponents¶: Number of principal components to use for Pca basis, including the mean kernel if requested. (int, default 5)

scaleByFwhm¶: Scale kernelSize, alardGaussians by input Fwhm (bool, default True)

singleKernelClipping¶: Do sigma clipping on each raw kernel candidate (bool, default True)

sizeCellX¶: Size (rows) in pixels of each SpatialCell for spatial modeling (int, default 128)

sizeCellY¶: Size (columns) in pixels of each SpatialCell for spatial modeling (int, default 128)

spatialBgOrder¶: Spatial order of differential background variation (int, default 1)

spatialKernelClipping¶: Do sigma clipping after building the spatial model (bool, default True)

spatialKernelOrder¶: Spatial order of convolution kernel variation (int, default 2)

spatialModelType¶

Type of spatial functions for kernel and background (str, default 'chebyshev1')

Allowed values:

'chebyshev1': Chebyshev polynomial of the first kind
'polynomial': Standard x,y polynomial
'None': Field is optional

subtractMeanForPca¶: Subtract off the mean feature before doing the Pca (bool, default True)

useAfwBackground¶: Use afw background subtraction instead of ip_diffim (bool, default False)

useBicForKernelBasis¶: Use Bayesian Information Criterion to select the number of bases going into the kernel (bool, default False)

useCoreStats¶: Use the core of the footprint for the quality statistics, instead of the entire footprint. WARNING: if there is deconvolution we probably will need to turn this off (bool, default False)

usePcaForSpatialKernel¶: Use Pca to reduce the dimensionality of the kernel basis sets. This is particularly useful for delta-function kernels. Functionally, after all Cells have their raw kernels determined, we run a Pca on these Kernels, re-fit the Cells using the eigenKernels and then fit those for spatial variation using the same technique as for Alard-Lupton kernels. If this option is used, the first term will have no spatial variation and the kernel sum will be conserved. (bool, default False)

warpingConfig¶: Config for warping exposures to a common alignment (WarperConfig, default <class 'lsst.afw.math.warper.WarperConfig'>)

Methods Documentation

setDefaults()¶: Derived config classes that must compute defaults rather than using the Field defaults should do so here. To correctly use inherited defaults, implementations of setDefaults() must call their base class’ setDefaults()

Navigation

PsfMatchConfigAL¶