MeasureDefectsTaskConfig¶

class lsst.cp.pipe.MeasureDefectsTaskConfig¶

Bases: lsst.pipe.base.PipelineTaskConfig

Configuration for measuring defects from a list of exposures

Attributes Summary

`badOnAndOffPixelColumnThreshold`	If BPC is the set of all the bad pixels in a given column (not necessarily consecutive) and the size of BPC is at least ‘badOnAndOffPixelColumnThreshold’, all the pixels between the pixels that satisfy minY (BPC) and maxY (BPC) will be marked as bad, with ‘Y’ being the long axis of the amplifier (and ‘X’ the other axis, which for a column is a constant for all pixels in the set BPC).
`connections`	Configurations describing the connections of the PipelineTask to datatypes (`Connections`, default `<class 'lsst.pipe.base.config.Connections'>`)
`goodPixelColumnGapThreshold`	Size, in pixels, of usable consecutive pixels in a column with on and off bad pixels (see ‘badOnAndOffPixelColumnThreshold’).
`history`
`nPixBorderLeftRight`	Number of pixels to exclude from left & right of image when looking for defects.
`nPixBorderUpDown`	Number of pixels to exclude from top & bottom of image when looking for defects.
`nSigmaBright`	Number of sigma above mean for bright pixel detection.
`nSigmaDark`	Number of sigma below mean for dark pixel detection.
`saveLogOutput`	Flag to enable/disable saving of log output for a task, enabled by default.
`saveMetadata`	Flag to enable/disable metadata saving for a task, enabled by default.

Methods Summary

`compare`(other[, shortcut, rtol, atol, output])	Compare this configuration to another `Config` for equality.
`formatHistory`(name, **kwargs)	Format a configuration field’s history to a human-readable format.
`freeze`()	Make this config, and all subconfigs, read-only.
`items`()	Get configurations as `(field name, field value)` pairs.
`iteritems`()	Iterate over (field name, field value) pairs.
`iterkeys`()	Iterate over field names
`itervalues`()	Iterate over field values.
`keys`()	Get field names.
`load`(filename[, root])	Modify this config in place by executing the Python code in a configuration file.
`loadFromStream`(stream[, root, filename])	Modify this Config in place by executing the Python code in the provided stream.
`loadFromString`(code[, root, filename])	Modify this Config in place by executing the Python code in the provided string.
`names`()	Get all the field names in the config, recursively.
`save`(filename[, root])	Save a Python script to the named file, which, when loaded, reproduces this config.
`saveToStream`(outfile[, root, skipImports])	Save a configuration file to a stream, which, when loaded, reproduces this config.
`saveToString`([skipImports])	Return the Python script form of this configuration as an executable string.
`setDefaults`()	Subclass hook for computing defaults.
`toDict`()	Make a dictionary of field names and their values.
`update`(**kw)	Update values of fields specified by the keyword arguments.
`validate`()	Validate the Config, raising an exception if invalid.
`values`()	Get field values.

Attributes Documentation

badOnAndOffPixelColumnThreshold¶: If BPC is the set of all the bad pixels in a given column (not necessarily consecutive) and the size of BPC is at least ‘badOnAndOffPixelColumnThreshold’, all the pixels between the pixels that satisfy minY (BPC) and maxY (BPC) will be marked as bad, with ‘Y’ being the long axis of the amplifier (and ‘X’ the other axis, which for a column is a constant for all pixels in the set BPC). If there are more than ‘goodPixelColumnGapThreshold’ consecutive non-bad pixels in BPC, an exception to the above is made and those consecutive ‘goodPixelColumnGapThreshold’ are not marked as bad. (int, default 50)

connections¶: Configurations describing the connections of the PipelineTask to datatypes (Connections, default <class 'lsst.pipe.base.config.Connections'>)

goodPixelColumnGapThreshold¶: Size, in pixels, of usable consecutive pixels in a column with on and off bad pixels (see ‘badOnAndOffPixelColumnThreshold’). (int, default 30)

history¶

nPixBorderLeftRight¶: Number of pixels to exclude from left & right of image when looking for defects. (int, default 7)

nPixBorderUpDown¶: Number of pixels to exclude from top & bottom of image when looking for defects. (int, default 7)

nSigmaBright¶: Number of sigma above mean for bright pixel detection. The default value was found to be appropriate for some LSST sensors in DM-17490. (float, default 4.8)

nSigmaDark¶: Number of sigma below mean for dark pixel detection. The default value was found to be appropriate for some LSST sensors in DM-17490. (float, default -5.0)

saveLogOutput¶: Flag to enable/disable saving of log output for a task, enabled by default. (bool, default True)

saveMetadata¶: Flag to enable/disable metadata saving for a task, enabled by default. (bool, default True)

Methods Documentation

compare(other, shortcut=True, rtol=1e-08, atol=1e-08, output=None)¶

Compare this configuration to another Config for equality.

Parameters:

other : lsst.pex.config.Config: Other Config object to compare against this config.
shortcut : bool, optional: If True, return as soon as an inequality is found. Default is True.
rtol : float, optional: Relative tolerance for floating point comparisons.
atol : float, optional: Absolute tolerance for floating point comparisons.
output : callable, optional: A callable that takes a string, used (possibly repeatedly) to report inequalities.

Returns:

isEqual : bool: True when the two lsst.pex.config.Config instances are equal. False if there is an inequality.

See also

lsst.pex.config.compareConfigs

Notes

Unselected targets of RegistryField fields and unselected choices of ConfigChoiceField fields are not considered by this method.

Floating point comparisons are performed by numpy.allclose.

formatHistory(name, **kwargs)¶

Format a configuration field’s history to a human-readable format.

Parameters:	name : `str` Name of a `Field` in this config. kwargs Keyword arguments passed to `lsst.pex.config.history.format`.
Returns:	history : `str` A string containing the formatted history.

See also

lsst.pex.config.history.format

freeze()¶: Make this config, and all subconfigs, read-only.

items()¶

Get configurations as (field name, field value) pairs.

Returns:	items : `list` List of tuples for each configuration. Tuple items are: Field name. Field value.

See also

lsst.pex.config.Config.iteritems

iteritems()¶

Iterate over (field name, field value) pairs.

Yields:	item : `tuple` Tuple items are: Field name. Field value.

See also

lsst.pex.config.Config.items

iterkeys()¶

Iterate over field names

Yields:	key : `str` A field’s key (attribute name).

See also

lsst.pex.config.Config.values

itervalues()¶

Iterate over field values.

Yields:	value : obj A field value.

See also

lsst.pex.config.Config.values

keys()¶

Get field names.

Returns:	names : `list` List of `lsst.pex.config.Field` names.

See also

lsst.pex.config.Config.iterkeys

load(filename, root='config')¶

Modify this config in place by executing the Python code in a configuration file.

Parameters:

filename : str

Name of the configuration file. A configuration file is Python module.

root : str, optional

Name of the variable in file that refers to the config being overridden.

For example, the value of root is "config" and the file contains:

config.myField = 5

Then this config’s field myField is set to 5.

Deprecated: For backwards compatibility, older config files that use root="root" instead of root="config" will be loaded with a warning printed to sys.stderr. This feature will be removed at some point.

loadFromStream(stream, root='config', filename=None)¶

Modify this Config in place by executing the Python code in the provided stream.

Parameters:

stream : file-like object, str, bytes, or compiled string

Stream containing configuration override code. If this is a code object, it should be compiled with mode="exec".

root : str, optional

Name of the variable in file that refers to the config being overridden.

For example, the value of root is "config" and the file contains:

config.myField = 5

Then this config’s field myField is set to 5.

Deprecated: For backwards compatibility, older config files that use root="root" instead of root="config" will be loaded with a warning printed to sys.stderr. This feature will be removed at some point.

filename : str, optional

Name of the configuration file, or None if unknown or contained in the stream. Used for error reporting.

Notes

For backwards compatibility reasons, this method accepts strings, bytes and code objects as well as file-like objects. New code should use loadFromString instead for most of these types.

loadFromString(code, root='config', filename=None)¶

Modify this Config in place by executing the Python code in the provided string.

Parameters:

code : str, bytes, or compiled string

Stream containing configuration override code.

root : str, optional

Name of the variable in file that refers to the config being overridden.

For example, the value of root is "config" and the file contains:

config.myField = 5

Then this config’s field myField is set to 5.

Deprecated: For backwards compatibility, older config files that use root="root" instead of root="config" will be loaded with a warning printed to sys.stderr. This feature will be removed at some point.

filename : str, optional

Name of the configuration file, or None if unknown or contained in the stream. Used for error reporting.

names()¶

Get all the field names in the config, recursively.

Returns:	names : `list` of `str` Field names.

save(filename, root='config')¶

Save a Python script to the named file, which, when loaded, reproduces this config.

Parameters:	filename : `str` Desination filename of this configuration. root : `str`, optional Name to use for the root config variable. The same value must be used when loading (see `lsst.pex.config.Config.load`).

saveToStream(outfile, root='config', skipImports=False)¶

Save a configuration file to a stream, which, when loaded, reproduces this config.

Parameters:

outfile : file-like object: Destination file object write the config into. Accepts strings not bytes.
root: Name to use for the root config variable. The same value must be used when loading (see lsst.pex.config.Config.load).
skipImports : bool, optional: If True then do not include import statements in output, this is to support human-oriented output from pipetask where additional clutter is not useful.

saveToString(skipImports=False)¶

Return the Python script form of this configuration as an executable string.

Parameters:	skipImports : `bool`, optional If `True` then do not include `import` statements in output, this is to support human-oriented output from `pipetask` where additional clutter is not useful.
Returns:	code : `str` A code string readable by `loadFromString`.

setDefaults()¶

Subclass hook for computing defaults.

Notes

Derived Config classes that must compute defaults rather than using the Field instances’s defaults should do so here. To correctly use inherited defaults, implementations of setDefaults must call their base class’s setDefaults.

toDict()¶

Make a dictionary of field names and their values.

Returns:	dict_ : `dict` Dictionary with keys that are `Field` names. Values are `Field` values.

See also

lsst.pex.config.Field.toDict

Notes

This method uses the toDict method of individual fields. Subclasses of Field may need to implement a toDict method for this method to work.

update(**kw)¶

Update values of fields specified by the keyword arguments.

Parameters:	kw Keywords are configuration field names. Values are configuration field values.

Notes

The __at and __label keyword arguments are special internal keywords. They are used to strip out any internal steps from the history tracebacks of the config. Do not modify these keywords to subvert a Config instance’s history.

Examples

This is a config with three fields:

>>> from lsst.pex.config import Config, Field
>>> class DemoConfig(Config):
...     fieldA = Field(doc='Field A', dtype=int, default=42)
...     fieldB = Field(doc='Field B', dtype=bool, default=True)
...     fieldC = Field(doc='Field C', dtype=str, default='Hello world')
...
>>> config = DemoConfig()

These are the default values of each field:

>>> for name, value in config.iteritems():
...     print(f"{name}: {value}")
...
fieldA: 42
fieldB: True
fieldC: 'Hello world'

Using this method to update fieldA and fieldC:

>>> config.update(fieldA=13, fieldC='Updated!')

Now the values of each field are:

>>> for name, value in config.iteritems():
...     print(f"{name}: {value}")
...
fieldA: 13
fieldB: True
fieldC: 'Updated!'

validate()¶

Validate the Config, raising an exception if invalid.

Raises:	lsst.pex.config.FieldValidationError Raised if verification fails.

Notes

The base class implementation performs type checks on all fields by calling their validate methods.

Complex single-field validation can be defined by deriving new Field types. For convenience, some derived lsst.pex.config.Field-types (ConfigField and ConfigChoiceField) are defined in lsst.pex.config that handle recursing into subconfigs.

Inter-field relationships should only be checked in derived Config classes after calling this method, and base validation is complete.

values()¶

Get field values.

Returns:	values : `list` List of field values.

See also

lsst.pex.config.Config.itervalues

Navigation

MeasureDefectsTaskConfig¶