CfhtIsrTask¶

class lsst.obs.cfht.cfhtIsrTask.CfhtIsrTask(**kwargs)¶

Bases: IsrTask

Attributes Summary

canMultiprocess

Methods Summary

`compareCameraKeywords`(exposureMetadata, ...)	Compare header keywords to confirm camera states match.
`convertIntToFloat`(exposure)	Convert exposure image from uint16 to float.
`darkCorrection`(exposure, darkExposure[, invert])	Apply dark correction in place.
`debugView`(exposure, stepname)	Utility function to examine ISR exposure at different stages.
`defineEffectivePtc`(ptcDataset, detector, ...)	Define an effective Photon Transfer Curve dataset with nominal gains and noise.
`doLinearize`(detector)	Check if linearization is needed for the detector cameraGeom.
`emptyMetadata`()	Empty (clear) the metadata for this Task and all sub-Tasks.
`ensureExposure`(inputExp[, camera, detectorNum])	Ensure that the data returned by Butler is a fully constructed exp.
`extractCalibDate`(calib)	Extract common calibration metadata values that will be written to output header.
`flatContext`(exp, flat[, dark])	Context manager that applies and removes flats and darks, if the task is configured to apply them.
`flatCorrection`(exposure, flatExposure[, invert])	Apply flat correction in place.
`getFullMetadata`()	Get metadata for all tasks.
`getFullName`()	Get the task name as a hierarchical name including parent task names.
`getName`()	Get the name of the task.
`getTaskDict`()	Get a dictionary of all tasks as a shallow copy.
`makeBinnedImages`(exposure)	Make visualizeVisit style binned exposures.
`makeField`(doc)	Make a `lsst.pex.config.ConfigurableField` for this task.
`makeSubtask`(name, **keyArgs)	Create a subtask as a new instance as the `name` attribute of this task.
`maskAmplifier`(ccdExposure, amp, defects)	Identify bad amplifiers, saturated and suspect pixels.
`maskAndInterpolateDefects`(exposure, ...)	Mask and interpolate defects using mask plane "BAD", in place.
`maskAndInterpolateNan`(exposure)	"Mask and interpolate NaN/infs using mask plane "UNMASKEDNAN", in place.
`maskDefect`(exposure, defectBaseList)	Mask defects using mask plane "BAD", in place.
`maskEdges`(exposure[, numEdgePixels, ...])	Mask edge pixels with applicable mask plane.
`maskNan`(exposure)	Mask NaNs using mask plane "UNMASKEDNAN", in place.
`maskNegativeVariance`(exposure)	Identify and mask pixels with negative variance values.
`measureBackground`(exposure[, IsrQaConfig])	Measure the image background in subgrids, for quality control.
`overscanCorrection`(ccdExposure, amp)	Apply overscan correction in place.
`roughZeroPoint`(exposure)	Set an approximate magnitude zero point for the exposure.
`run`(ccdExposure[, bias, linearizer, dark, ...])	Perform instrument signature removal on an exposure
`runQuantum`(butlerQC, inputRefs, outputRefs)	Do butler IO and transform to provide in memory objects for tasks `run` method.
`saturationDetection`(exposure, amp)	Detect and mask saturated pixels in config.saturatedMaskName.
`saturationInterpolation`(exposure)	Interpolate over saturated pixels, in place.
`suspectDetection`(exposure, amp)	Detect and mask suspect pixels in config.suspectMaskName.
`timer`(name[, logLevel])	Context manager to log performance data for an arbitrary block of code.
`updateVariance`(ampExposure, amp, ptcDataset)	Set the variance plane using the gain and read noise

Attributes Documentation

canMultiprocess: ClassVar[bool] = True¶

Methods Documentation

compareCameraKeywords(exposureMetadata, calib, calibName)¶

Compare header keywords to confirm camera states match.

Parameters:

exposureMetadatalsst.daf.base.PropertySet: Header for the exposure being processed.
caliblsst.afw.image.Exposure or lsst.ip.isr.IsrCalib: Calibration to be applied.
calibNamestr: Calib type for log message.

convertIntToFloat(exposure)¶

Convert exposure image from uint16 to float.

If the exposure does not need to be converted, the input is immediately returned. For exposures that are converted to use floating point pixels, the variance is set to unity and the mask to zero.

Parameters:

exposurelsst.afw.image.Exposure: The raw exposure to be converted.

Returns:

newexposurelsst.afw.image.Exposure: The input exposure, converted to floating point pixels.

Raises:

RuntimeError: Raised if the exposure type cannot be converted to float.

darkCorrection(exposure, darkExposure, invert=False)¶

Apply dark correction in place.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.
darkExposurelsst.afw.image.Exposure: Dark exposure of the same size as exposure.
invertBool, optional: If True, re-add the dark to an already corrected image.

Raises:

RuntimeError: Raised if either exposure or darkExposure do not have their dark time defined.

See also

lsst.ip.isr.isrFunctions.darkCorrection

debugView(exposure, stepname)¶

Utility function to examine ISR exposure at different stages.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to view.
stepnamestr: State of processing to view.

defineEffectivePtc(ptcDataset, detector, bfGains, overScans, metadata)¶

Define an effective Photon Transfer Curve dataset with nominal gains and noise.

Parameters¶

ptcDatasetlsst.ip.isr.PhotonTransferCurveDataset: Input Photon Transfer Curve dataset.
detectorlsst.afw.cameraGeom.Detector: Detector object.
bfGainsdict: Gains from running the brighter-fatter code. A dict keyed by amplifier name for the detector in question.
ovserScanslist [lsst.pipe.base.Struct]: List of overscanResults structures
metadatalsst.daf.base.PropertyList: Exposure metadata to update gain and noise provenance.

Returns:

effectivePtclsst.ip.isr.PhotonTransferCurveDataset: PTC dataset containing gains and readout noise values to be used throughout Instrument Signature Removal.

doLinearize(detector)¶

Check if linearization is needed for the detector cameraGeom.

Checks config.doLinearize and the linearity type of the first amplifier.

Parameters:

detectorlsst.afw.cameraGeom.Detector: Detector to get linearity type from.

Returns:

doLinearizeBool: If True, linearization should be performed.

emptyMetadata() → None¶: Empty (clear) the metadata for this Task and all sub-Tasks.

ensureExposure(inputExp, camera=None, detectorNum=None)¶

Ensure that the data returned by Butler is a fully constructed exp.

ISR requires exposure-level image data for historical reasons, so if we did not recieve that from Butler, construct it from what we have, modifying the input in place.

Parameters:

inputExplsst.afw.image image-type.: The input data structure obtained from Butler. Can be lsst.afw.image.Exposure, lsst.afw.image.DecoratedImageU, or lsst.afw.image.ImageF
cameralsst.afw.cameraGeom.camera, optional: The camera associated with the image. Used to find the appropriate detector if detector is not already set.
detectorNumint, optional: The detector in the camera to attach, if the detector is not already set.

Returns:

inputExplsst.afw.image.Exposure: The re-constructed exposure, with appropriate detector parameters.

Raises:

TypeError: Raised if the input data cannot be used to construct an exposure.

static extractCalibDate(calib)¶

Extract common calibration metadata values that will be written to output header.

Parameters:

caliblsst.afw.image.Exposure or lsst.ip.isr.IsrCalib: Calibration to pull date information from.

Returns:

dateStringstr: Calibration creation date string to add to header.

flatContext(exp, flat, dark=None)¶

Context manager that applies and removes flats and darks, if the task is configured to apply them.

Parameters:

explsst.afw.image.Exposure: Exposure to process.
flatlsst.afw.image.Exposure: Flat exposure the same size as exp.
darklsst.afw.image.Exposure, optional: Dark exposure the same size as exp.

Yields:

explsst.afw.image.Exposure: The flat and dark corrected exposure.

flatCorrection(exposure, flatExposure, invert=False)¶

Apply flat correction in place.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.
flatExposurelsst.afw.image.Exposure: Flat exposure of the same size as exposure.
invertBool, optional: If True, unflatten an already flattened image.

See also

lsst.ip.isr.isrFunctions.flatCorrection

getFullMetadata() → TaskMetadata¶

Get metadata for all tasks.

Returns:

metadataTaskMetadata: The keys are the full task name. Values are metadata for the top-level task and all subtasks, sub-subtasks, etc.

Notes

The returned metadata includes timing information (if @timer.timeMethod is used) and any metadata set by the task. The name of each item consists of the full task name with . replaced by :, followed by . and the name of the item, e.g.:

topLevelTaskName:subtaskName:subsubtaskName.itemName

using : in the full task name disambiguates the rare situation that a task has a subtask and a metadata item with the same name.

getFullName() → str¶

Get the task name as a hierarchical name including parent task names.

Returns:

fullNamestr

The full name consists of the name of the parent task and each subtask separated by periods. For example:

The full name of top-level task “top” is simply “top”.
The full name of subtask “sub” of top-level task “top” is “top.sub”.
The full name of subtask “sub2” of subtask “sub” of top-level task “top” is “top.sub.sub2”.

getName() → str¶

Get the name of the task.

Returns:

taskNamestr: Name of the task.

See also

getFullName: Get the full name of the task.

getTaskDict() → dict[str, weakref.ReferenceType[lsst.pipe.base.task.Task]]¶

Get a dictionary of all tasks as a shallow copy.

Returns:

taskDictdict: Dictionary containing full task name: task object for the top-level task and all subtasks, sub-subtasks, etc.

makeBinnedImages(exposure)¶

Make visualizeVisit style binned exposures.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to bin.

Returns:

bin1lsst.afw.image.Exposure: Binned exposure using binFactor1.
bin2lsst.afw.image.Exposure: Binned exposure using binFactor2.

classmethod makeField(doc: str) → ConfigurableField¶

Make a lsst.pex.config.ConfigurableField for this task.

Parameters:

docstr: Help text for the field.

Returns:

configurableFieldlsst.pex.config.ConfigurableField: A ConfigurableField for this task.

Examples

Provides a convenient way to specify this task is a subtask of another task.

Here is an example of use:

class OtherTaskConfig(lsst.pex.config.Config):
    aSubtask = ATaskClass.makeField("brief description of task")

makeSubtask(name: str, **keyArgs: Any) → None¶

Create a subtask as a new instance as the name attribute of this task.

Parameters:

namestr

Brief name of the subtask.

**keyArgs

Extra keyword arguments used to construct the task. The following arguments are automatically provided and cannot be overridden:

config.
parentTask.

Notes

The subtask must be defined by Task.config.name, an instance of ConfigurableField or RegistryField.

maskAmplifier(ccdExposure, amp, defects)¶

Identify bad amplifiers, saturated and suspect pixels.

Parameters:

ccdExposurelsst.afw.image.Exposure: Input exposure to be masked.
amplsst.afw.cameraGeom.Amplifier: Catalog of parameters defining the amplifier on this exposure to mask.
defectslsst.ip.isr.Defects: List of defects. Used to determine if the entire amplifier is bad.

Returns:

badAmpBool: If this is true, the entire amplifier area is covered by defects and unusable.

maskAndInterpolateDefects(exposure, defectBaseList)¶

Mask and interpolate defects using mask plane “BAD”, in place.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.
defectBaseListdefects-like: List of defects to mask and interpolate. Can be lsst.ip.isr.Defects or list of lsst.afw.image.DefectBase.

See also

lsst.ip.isr.isrTask.maskDefect

maskAndInterpolateNan(exposure)¶

“Mask and interpolate NaN/infs using mask plane “UNMASKEDNAN”, in place.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.

See also

lsst.ip.isr.isrTask.maskNan

maskDefect(exposure, defectBaseList)¶

Mask defects using mask plane “BAD”, in place.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.
defectBaseListdefect-type: List of defects to mask. Can be of type lsst.ip.isr.Defects or list of lsst.afw.image.DefectBase.

Notes

Call this after CCD assembly, since defects may cross amplifier boundaries.

maskEdges(exposure, numEdgePixels=0, maskPlane='SUSPECT', level='DETECTOR')¶

Mask edge pixels with applicable mask plane.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.
numEdgePixelsint, optional: Number of edge pixels to mask.
maskPlanestr, optional: Mask plane name to use.
levelstr, optional: Level at which to mask edges.

maskNan(exposure)¶

Mask NaNs using mask plane “UNMASKEDNAN”, in place.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.

Notes

We mask over all non-finite values (NaN, inf), including those that are masked with other bits (because those may or may not be interpolated over later, and we want to remove all NaN/infs). Despite this behaviour, the “UNMASKEDNAN” mask plane is used to preserve the historical name.

maskNegativeVariance(exposure)¶

Identify and mask pixels with negative variance values.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.

See also

lsst.ip.isr.isrFunctions.updateVariance

measureBackground(exposure, IsrQaConfig=None)¶

Measure the image background in subgrids, for quality control.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.
IsrQaConfiglsst.ip.isr.isrQa.IsrQaConfig: Configuration object containing parameters on which background statistics and subgrids to use.

overscanCorrection(ccdExposure, amp)¶

Apply overscan correction in place.

This method does initial pixel rejection of the overscan region. The overscan can also be optionally segmented to allow for discontinuous overscan responses to be fit separately. The actual overscan subtraction is performed by the lsst.ip.isr.overscan.OverscanTask, which is called here after the amplifier is preprocessed.

Parameters:

ccdExposurelsst.afw.image.Exposure: Exposure to have overscan correction performed.
amplsst.afw.cameraGeom.Amplifer: The amplifier to consider while correcting the overscan.

Returns:

overscanResultslsst.pipe.base.Struct

Result struct with components:

imageFit: Value or fit subtracted from the amplifier image data. (scalar or lsst.afw.image.Image)
overscanFit: Value or fit subtracted from the overscan image data. (scalar or lsst.afw.image.Image)
overscanImage: Image of the overscan region with the overscan correction applied. This quantity is used to estimate the amplifier read noise empirically. (lsst.afw.image.Image)
edgeMask: Mask of the suspect pixels. (lsst.afw.image.Mask)
overscanMean: Median overscan fit value. (float)
overscanSigma: Clipped standard deviation of the overscan after correction. (float)

Raises:

RuntimeError: Raised if the amp does not contain raw pixel information.

See also

lsst.ip.isr.overscan.OverscanTask

roughZeroPoint(exposure)¶

Set an approximate magnitude zero point for the exposure.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.

run(ccdExposure, bias=None, linearizer=None, dark=None, flat=None, defects=None, fringes=None, bfKernel=None, **kwds)¶

Perform instrument signature removal on an exposure

Steps include: - Detect saturation, apply overscan correction, bias, dark and flat - Perform CCD assembly - Interpolate over defects, saturated pixels and all NaNs - Persist the ISR-corrected exposure as “postISRCCD” if

config.doWrite is True

Parameters:

ccdExposurelsst.afw.image.Exposure: Detector data.
biaslsst.afw.image.exposure: Exposure of bias frame.
linearizerlsst.ip.isr.LinearizeBase callable: Linearizing functor; a subclass of lsst.ip.isr.LinearizeBase.
darklsst.afw.image.exposure: Exposure of dark frame.
flatlsst.afw.image.exposure: Exposure of flatfield.
defectslist: list of detects
fringeslsst.afw.image.Exposure or list lsst.afw.image.Exposure: exposure of fringe frame or list of fringe exposure
bfKernelNone: kernel used for brighter-fatter correction; currently unsupported
**kwdsdict: additional kwargs forwarded to IsrTask.run.

Returns:

structlsst.pipe.base.Struct with fields:

exposure: the exposure after application of ISR

runQuantum(butlerQC, inputRefs, outputRefs)¶

Do butler IO and transform to provide in memory objects for tasks run method.

Parameters:

butlerQCQuantumContext: A butler which is specialized to operate in the context of a lsst.daf.butler.Quantum.
inputRefsInputQuantizedConnection: Datastructure whose attribute names are the names that identify connections defined in corresponding PipelineTaskConnections class. The values of these attributes are the lsst.daf.butler.DatasetRef objects associated with the defined input/prerequisite connections.
outputRefsOutputQuantizedConnection: Datastructure whose attribute names are the names that identify connections defined in corresponding PipelineTaskConnections class. The values of these attributes are the lsst.daf.butler.DatasetRef objects associated with the defined output connections.

saturationDetection(exposure, amp)¶

Detect and mask saturated pixels in config.saturatedMaskName.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process. Only the amplifier DataSec is processed.
amplsst.afw.cameraGeom.Amplifier: Amplifier detector data.

See also

lsst.ip.isr.isrFunctions.makeThresholdMask

saturationInterpolation(exposure)¶

Interpolate over saturated pixels, in place.

This method should be called after saturationDetection, to ensure that the saturated pixels have been identified in the SAT mask. It should also be called after assembleCcd, since saturated regions may cross amplifier boundaries.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process.

See also

lsst.ip.isr.isrTask.saturationDetection
lsst.ip.isr.isrFunctions.interpolateFromMask

suspectDetection(exposure, amp)¶

Detect and mask suspect pixels in config.suspectMaskName.

Parameters:

exposurelsst.afw.image.Exposure: Exposure to process. Only the amplifier DataSec is processed.
amplsst.afw.cameraGeom.Amplifier: Amplifier detector data.

See also

lsst.ip.isr.isrFunctions.makeThresholdMask

Notes

Suspect pixels are pixels whose value is greater than amp.getSuspectLevel(). This is intended to indicate pixels that may be affected by unknown systematics; for example if non-linearity corrections above a certain level are unstable then that would be a useful value for suspectLevel. A value of nan indicates that no such level exists and no pixels are to be masked as suspicious.

timer(name: str, logLevel: int = 10) → Iterator[None]¶

Context manager to log performance data for an arbitrary block of code.

Parameters:

namestr: Name of code being timed; data will be logged using item name: Start and End.
logLevelint: A logging level constant.

See also

lsst.utils.timer.logInfo: Implementation function.

Examples

Creating a timer context:

with self.timer("someCodeToTime"):
    pass  # code to time

updateVariance(ampExposure, amp, ptcDataset)¶

Set the variance plane using the gain and read noise

The read noise is calculated from the overscanImage if the doEmpiricalReadNoise option is set in the configuration; otherwise the value from the amplifier data is used.

Parameters:

ampExposurelsst.afw.image.Exposure: Exposure to process.
amplsst.afw.cameraGeom.Amplifier or FakeAmp: Amplifier detector data.
ptcDatasetlsst.ip.isr.PhotonTransferCurveDataset: Effective PTC dataset containing the gains and read noise.

See also

lsst.ip.isr.isrFunctions.updateVariance

Navigation

CfhtIsrTask¶

Parameters¶