AssembleCoaddConfig

class lsst.pipe.tasks.assembleCoadd.AssembleCoaddConfig

Bases: lsst.pipe.tasks.coaddBase.CoaddBaseConfig, lsst.pipe.base.PipelineTaskConfig

Configuration parameters for the AssembleCoaddTask.

Notes

The doMaskBrightObjects and brightObjectMaskName configuration options only set the bitplane config.brightObjectMaskName. To make this useful you must also configure the flags.pixel algorithm, for example by adding

config.measurement.plugins["base_PixelFlags"].masksFpCenter.append("BRIGHT_OBJECT")
config.measurement.plugins["base_PixelFlags"].masksFpAnywhere.append("BRIGHT_OBJECT")

to your measureCoaddSources.py and forcedPhotCoadd.py config overrides.

Attributes Summary

badMaskPlanes Mask planes that, if set, the associated pixel should not be included in the coaddTempExp.
brightObjectMaskName Name of mask bit used for bright objects (str, default 'BRIGHT_OBJECT')
calcErrorFromInputVariance Calculate coadd variance from input variance by stacking statistic.Passed to StatisticsControl.setCalcErrorFromInputVariance() (bool, default True)
clipIter Number of iterations of outlier rejection; ignored if non-clipping statistic selected.
coaddName Coadd name: typically one of deep or goodSeeing.
coaddPsf Configuration for CoaddPsf (CoaddPsfConfig, default <class 'lsst.meas.algorithms.coaddPsf.coaddPsf.CoaddPsfConfig'>)
connections Configurations describing the connections of the PipelineTask to datatypes (Connections, default <class 'lsst.pipe.base.config.Connections'>)
doApplyExternalPhotoCalib Whether to apply external photometric calibration via an lsst.afw.image.PhotoCalib object.
doApplyExternalSkyWcs Whether to apply external astrometric calibration via an lsst.afw.geom.SkyWcs object.
doAttachTransmissionCurve Attach a piecewise TransmissionCurve for the coadd? (requires all input Exposures to have TransmissionCurves).
doInterp Interpolate over NaN pixels? Also extrapolate, if necessary, but the results are ugly.
doMaskBrightObjects Set mask and flag bits for bright objects? (bool, default False)
doNImage Create image of number of contributing exposures for each pixel (bool, default False)
doPsfMatch Match to modelPsf? Deprecated.
doSelectVisits Coadd only visits selected by a SelectVisitsTask (bool, default False)
doSigmaClip Perform sigma clipped outlier rejection with MEANCLIP statistic? (DEPRECATED) (bool, default False)
doUsePsfMatchedPolygons Use ValidPolygons from shrunk Psf-Matched Calexps? Should be set to True by CompareWarp only.
doWrite Persist coadd? (bool, default True)
externalPhotoCalibName Type of external PhotoCalib if doApplyExternalPhotoCalib is True.
externalSkyWcsName Type of external SkyWcs if doApplyExternalSkyWcs is True.
hasFakes Should be set to True if fake sources have been inserted into the input data.
history
includeCalibVar Add photometric calibration variance to warp variance plane.
inputRecorder Subtask that helps fill CoaddInputs catalogs added to the final Exposure (ConfigurableInstance, default <class 'lsst.pipe.tasks.coaddInputRecorder.CoaddInputRecorderConfig'>)
interpImage Task to interpolate (and extrapolate) over NaN pixels (ConfigurableInstance, default <class 'lsst.pipe.tasks.interpImage.InterpImageConfig'>)
maskPropagationThresholds Threshold (in fractional weight) of rejection at which we propagate a mask plane to the coadd; that is, we set the mask bit on the coadd if the fraction the rejected frames would have contributed exceeds this value.
matchingKernelSize Size in pixels of matching kernel.
modelPsf Model Psf factory (ConfigurableInstance, default <class 'lsst.meas.algorithms.gaussianPsfFactory.GaussianPsfFactory'>)
removeMaskPlanes Mask planes to remove before coadding (List, default ['NOT_DEBLENDED'])
saveMetadata Flag to enable/disable metadata saving for a task, enabled by default.
scaleZeroPoint Task to adjust the photometric zero point of the coadd temp exposures (ConfigurableInstance, default <class 'lsst.pipe.tasks.scaleZeroPoint.ScaleZeroPointConfig'>)
select Image selection subtask.
sigmaClip Sigma for outlier rejection; ignored if non-clipping statistic selected.
statistic Main stacking statistic for aggregating over the epochs.
subregionSize Width, height of stack subregion size; make small enough that a full stack of images will fit into memory at once.
useGlobalExternalPhotoCalib When using doApplyExternalPhotoCalib, use ‘global’ calibrations that are not run per-tract.
useGlobalExternalSkyWcs When using doApplyExternalSkyWcs, use ‘global’ calibrations that are not run per-tract.
warpType Warp name: one of ‘direct’ or ‘psfMatched’ (str, default 'direct')

Methods Summary

compare(other[, shortcut, rtol, atol, output]) Compare this configuration to another Config for equality.
formatHistory(name, **kwargs) Format a configuration field’s history to a human-readable format.
freeze() Make this config, and all subconfigs, read-only.
items() Get configurations as (field name, field value) pairs.
iteritems() Iterate over (field name, field value) pairs.
iterkeys() Iterate over field names
itervalues() Iterate over field values.
keys() Get field names.
load(filename[, root]) Modify this config in place by executing the Python code in a configuration file.
loadFromStream(stream[, root, filename]) Modify this Config in place by executing the Python code in the provided stream.
names() Get all the field names in the config, recursively.
save(filename[, root]) Save a Python script to the named file, which, when loaded, reproduces this config.
saveToStream(outfile[, root, skipImports]) Save a configuration file to a stream, which, when loaded, reproduces this config.
setDefaults() Subclass hook for computing defaults.
toDict() Make a dictionary of field names and their values.
update(**kw) Update values of fields specified by the keyword arguments.
validate() Validate the Config, raising an exception if invalid.
values() Get field values.

Attributes Documentation

badMaskPlanes

Mask planes that, if set, the associated pixel should not be included in the coaddTempExp. (List, default ('NO_DATA',))

brightObjectMaskName

Name of mask bit used for bright objects (str, default 'BRIGHT_OBJECT')

calcErrorFromInputVariance

Calculate coadd variance from input variance by stacking statistic.Passed to StatisticsControl.setCalcErrorFromInputVariance() (bool, default True)

clipIter

Number of iterations of outlier rejection; ignored if non-clipping statistic selected. (int, default 2)

coaddName

Coadd name: typically one of deep or goodSeeing. (str, default 'deep')

coaddPsf

Configuration for CoaddPsf (CoaddPsfConfig, default <class 'lsst.meas.algorithms.coaddPsf.coaddPsf.CoaddPsfConfig'>)

connections

Configurations describing the connections of the PipelineTask to datatypes (Connections, default <class 'lsst.pipe.base.config.Connections'>)

doApplyExternalPhotoCalib

Whether to apply external photometric calibration via an lsst.afw.image.PhotoCalib object. Uses the externalPhotoCalibName field to determine which calibration to load. (bool, default False)

doApplyExternalSkyWcs

Whether to apply external astrometric calibration via an lsst.afw.geom.SkyWcs object. Uses externalSkyWcsName field to determine which calibration to load. (bool, default False)

doAttachTransmissionCurve

Attach a piecewise TransmissionCurve for the coadd? (requires all input Exposures to have TransmissionCurves). (bool, default False)

doInterp

Interpolate over NaN pixels? Also extrapolate, if necessary, but the results are ugly. (bool, default True)

doMaskBrightObjects

Set mask and flag bits for bright objects? (bool, default False)

doNImage

Create image of number of contributing exposures for each pixel (bool, default False)

doPsfMatch

Match to modelPsf? Deprecated. Sets makePsfMatched=True, makeDirect=False (bool, default False)

doSelectVisits

Coadd only visits selected by a SelectVisitsTask (bool, default False)

doSigmaClip

Perform sigma clipped outlier rejection with MEANCLIP statistic? (DEPRECATED) (bool, default False)

doUsePsfMatchedPolygons

Use ValidPolygons from shrunk Psf-Matched Calexps? Should be set to True by CompareWarp only. (bool, default False)

doWrite

Persist coadd? (bool, default True)

externalPhotoCalibName

Type of external PhotoCalib if doApplyExternalPhotoCalib is True. This field is only used for Gen2 middleware. (str, default 'jointcal')

Allowed values:

'jointcal'
Use jointcal_photoCalib
'fgcm'
Use fgcm_photoCalib
'fgcm_tract'
Use fgcm_tract_photoCalib
'None'
Field is optional
externalSkyWcsName

Type of external SkyWcs if doApplyExternalSkyWcs is True. This field is only used for Gen2 middleware. (str, default 'jointcal')

Allowed values:

'jointcal'
Use jointcal_wcs
'None'
Field is optional
hasFakes

Should be set to True if fake sources have been inserted into the input data. (bool, default False)

history
includeCalibVar

Add photometric calibration variance to warp variance plane. (bool, default False)

inputRecorder

Subtask that helps fill CoaddInputs catalogs added to the final Exposure (ConfigurableInstance, default <class 'lsst.pipe.tasks.coaddInputRecorder.CoaddInputRecorderConfig'>)

interpImage

Task to interpolate (and extrapolate) over NaN pixels (ConfigurableInstance, default <class 'lsst.pipe.tasks.interpImage.InterpImageConfig'>)

maskPropagationThresholds

Threshold (in fractional weight) of rejection at which we propagate a mask plane to the coadd; that is, we set the mask bit on the coadd if the fraction the rejected frames would have contributed exceeds this value. (Dict, default {'SAT': 0.1})

matchingKernelSize

Size in pixels of matching kernel. Must be odd. (int, default 21)

modelPsf

Model Psf factory (ConfigurableInstance, default <class 'lsst.meas.algorithms.gaussianPsfFactory.GaussianPsfFactory'>)

removeMaskPlanes

Mask planes to remove before coadding (List, default ['NOT_DEBLENDED'])

saveMetadata

Flag to enable/disable metadata saving for a task, enabled by default. (bool, default True)

scaleZeroPoint

Task to adjust the photometric zero point of the coadd temp exposures (ConfigurableInstance, default <class 'lsst.pipe.tasks.scaleZeroPoint.ScaleZeroPointConfig'>)

select

Image selection subtask. (ConfigurableInstance, default <class 'lsst.pex.config.config.Config'>)

sigmaClip

Sigma for outlier rejection; ignored if non-clipping statistic selected. (float, default 3.0)

statistic

Main stacking statistic for aggregating over the epochs. (str, default 'MEANCLIP')

subregionSize

Width, height of stack subregion size; make small enough that a full stack of images will fit into memory at once. (List, default (2000, 2000))

useGlobalExternalPhotoCalib

When using doApplyExternalPhotoCalib, use ‘global’ calibrations that are not run per-tract. When False, use per-tract photometric calibration files. (bool, default True)

useGlobalExternalSkyWcs

When using doApplyExternalSkyWcs, use ‘global’ calibrations that are not run per-tract. When False, use per-tract wcs files. (bool, default False)

warpType

Warp name: one of ‘direct’ or ‘psfMatched’ (str, default 'direct')

Methods Documentation

compare(other, shortcut=True, rtol=1e-08, atol=1e-08, output=None)

Compare this configuration to another Config for equality.

Parameters:
other : lsst.pex.config.Config

Other Config object to compare against this config.

shortcut : bool, optional

If True, return as soon as an inequality is found. Default is True.

rtol : float, optional

Relative tolerance for floating point comparisons.

atol : float, optional

Absolute tolerance for floating point comparisons.

output : callable, optional

A callable that takes a string, used (possibly repeatedly) to report inequalities.

Returns:
isEqual : bool

True when the two lsst.pex.config.Config instances are equal. False if there is an inequality.

Notes

Unselected targets of RegistryField fields and unselected choices of ConfigChoiceField fields are not considered by this method.

Floating point comparisons are performed by numpy.allclose.

formatHistory(name, **kwargs)

Format a configuration field’s history to a human-readable format.

Parameters:
name : str

Name of a Field in this config.

kwargs

Keyword arguments passed to lsst.pex.config.history.format.

Returns:
history : str

A string containing the formatted history.

freeze()

Make this config, and all subconfigs, read-only.

items()

Get configurations as (field name, field value) pairs.

Returns:
items : list

List of tuples for each configuration. Tuple items are:

  1. Field name.
  2. Field value.
iteritems()

Iterate over (field name, field value) pairs.

Yields:
item : tuple

Tuple items are:

  1. Field name.
  2. Field value.
iterkeys()

Iterate over field names

Yields:
key : str

A field’s key (attribute name).

itervalues()

Iterate over field values.

Yields:
value : obj

A field value.

keys()

Get field names.

Returns:
names : list

List of lsst.pex.config.Field names.

load(filename, root='config')

Modify this config in place by executing the Python code in a configuration file.

Parameters:
filename : str

Name of the configuration file. A configuration file is Python module.

root : str, optional

Name of the variable in file that refers to the config being overridden.

For example, the value of root is "config" and the file contains:

config.myField = 5

Then this config’s field myField is set to 5.

Deprecated: For backwards compatibility, older config files that use root="root" instead of root="config" will be loaded with a warning printed to sys.stderr. This feature will be removed at some point.

See also

lsst.pex.config.Config.loadFromStream, lsst.pex.config.Config.save, lsst.pex.config.Config.saveFromStream

loadFromStream(stream, root='config', filename=None)

Modify this Config in place by executing the Python code in the provided stream.

Parameters:
stream : file-like object, str, or compiled string

Stream containing configuration override code.

root : str, optional

Name of the variable in file that refers to the config being overridden.

For example, the value of root is "config" and the file contains:

config.myField = 5

Then this config’s field myField is set to 5.

Deprecated: For backwards compatibility, older config files that use root="root" instead of root="config" will be loaded with a warning printed to sys.stderr. This feature will be removed at some point.

filename : str, optional

Name of the configuration file, or None if unknown or contained in the stream. Used for error reporting.

See also

lsst.pex.config.Config.load, lsst.pex.config.Config.save, lsst.pex.config.Config.saveFromStream

names()

Get all the field names in the config, recursively.

Returns:
names : list of str

Field names.

save(filename, root='config')

Save a Python script to the named file, which, when loaded, reproduces this config.

Parameters:
filename : str

Desination filename of this configuration.

root : str, optional

Name to use for the root config variable. The same value must be used when loading (see lsst.pex.config.Config.load).

saveToStream(outfile, root='config', skipImports=False)

Save a configuration file to a stream, which, when loaded, reproduces this config.

Parameters:
outfile : file-like object

Destination file object write the config into. Accepts strings not bytes.

root

Name to use for the root config variable. The same value must be used when loading (see lsst.pex.config.Config.load).

skipImports : bool, optional

If True then do not include import statements in output, this is to support human-oriented output from pipetask where additional clutter is not useful.

setDefaults()

Subclass hook for computing defaults.

Notes

Derived Config classes that must compute defaults rather than using the Field instances’s defaults should do so here. To correctly use inherited defaults, implementations of setDefaults must call their base class’s setDefaults.

toDict()

Make a dictionary of field names and their values.

Returns:
dict_ : dict

Dictionary with keys that are Field names. Values are Field values.

Notes

This method uses the toDict method of individual fields. Subclasses of Field may need to implement a toDict method for this method to work.

update(**kw)

Update values of fields specified by the keyword arguments.

Parameters:
kw

Keywords are configuration field names. Values are configuration field values.

Notes

The __at and __label keyword arguments are special internal keywords. They are used to strip out any internal steps from the history tracebacks of the config. Do not modify these keywords to subvert a Config instance’s history.

Examples

This is a config with three fields:

>>> from lsst.pex.config import Config, Field
>>> class DemoConfig(Config):
...     fieldA = Field(doc='Field A', dtype=int, default=42)
...     fieldB = Field(doc='Field B', dtype=bool, default=True)
...     fieldC = Field(doc='Field C', dtype=str, default='Hello world')
...
>>> config = DemoConfig()

These are the default values of each field:

>>> for name, value in config.iteritems():
...     print(f"{name}: {value}")
...
fieldA: 42
fieldB: True
fieldC: 'Hello world'

Using this method to update fieldA and fieldC:

>>> config.update(fieldA=13, fieldC='Updated!')

Now the values of each field are:

>>> for name, value in config.iteritems():
...     print(f"{name}: {value}")
...
fieldA: 13
fieldB: True
fieldC: 'Updated!'
validate()

Validate the Config, raising an exception if invalid.

Raises:
lsst.pex.config.FieldValidationError

Raised if verification fails.

Notes

The base class implementation performs type checks on all fields by calling their validate methods.

Complex single-field validation can be defined by deriving new Field types. For convenience, some derived lsst.pex.config.Field-types (ConfigField and ConfigChoiceField) are defined in lsst.pex.config that handle recursing into subconfigs.

Inter-field relationships should only be checked in derived Config classes after calling this method, and base validation is complete.

values()

Get field values.

Returns:
values : list

List of field values.