MeasureCrosstalkTask

class lsst.cp.pipe.MeasureCrosstalkTask(**kwargs)

Bases: lsst.pipe.base.CmdLineTask

Measure intra-detector crosstalk.

See also

lsst.ip.isr.crosstalk.CrosstalkCalib
lsst.cp.pipe.CrosstalkExtractTask
lsst.cp.pipe.CrosstalkSolveTask

Notes

The crosstalk this method measures assumes that when a bright pixel is found in one detector amplifier, all other detector amplifiers may see a signal change in the same pixel location (relative to the readout amplifier) as these other pixels are read out at the same time.

After processing each input exposure through a limited set of ISR stages, bright unmasked pixels above the threshold are identified. The potential CT signal is found by taking the ratio of the appropriate background-subtracted pixel value on the other amplifiers to the input value on the source amplifier. If the source amplifier has a large number of bright pixels as well, the background level may be elevated, leading to poor ratio measurements.

The set of ratios found between each pair of amplifiers across all input exposures is then gathered to produce the final CT coefficients. The sigma-clipped mean and sigma are returned from these sets of ratios, with the coefficient to supply to the ISR CrosstalkTask() being the multiplicative inverse of these values.

This Task simply calls the pipetask versions of the measure crosstalk code.

Methods Summary

emptyMetadata() Empty (clear) the metadata for this Task and all sub-Tasks.
getAllSchemaCatalogs() Get schema catalogs for all tasks in the hierarchy, combining the results into a single dict.
getFullMetadata() Get metadata for all tasks.
getFullName() Get the task name as a hierarchical name including parent task names.
getName() Get the name of the task.
getSchemaCatalogs() Get the schemas generated by this task.
getTaskDict() Get a dictionary of all tasks as a shallow copy.
makeField(doc) Make a lsst.pex.config.ConfigurableField for this task.
makeSubtask(name, **keyArgs) Create a subtask as a new instance as the name attribute of this task.
runDataRef(dataRefList) Run extract task on each of inputs in the dataRef list, then pass that to the solver task.
timer(name, logLevel) Context manager to log performance data for an arbitrary block of code.

Methods Documentation

emptyMetadata() → None

Empty (clear) the metadata for this Task and all sub-Tasks.

getAllSchemaCatalogs() → Dict[str, Any]

Get schema catalogs for all tasks in the hierarchy, combining the results into a single dict.

Returns:
schemacatalogs : dict

Keys are butler dataset type, values are a empty catalog (an instance of the appropriate lsst.afw.table Catalog type) for all tasks in the hierarchy, from the top-level task down through all subtasks.

Notes

This method may be called on any task in the hierarchy; it will return the same answer, regardless.

The default implementation should always suffice. If your subtask uses schemas the override Task.getSchemaCatalogs, not this method.

getFullMetadata() → lsst.pipe.base._task_metadata.TaskMetadata

Get metadata for all tasks.

Returns:
metadata : TaskMetadata

The keys are the full task name. Values are metadata for the top-level task and all subtasks, sub-subtasks, etc.

Notes

The returned metadata includes timing information (if @timer.timeMethod is used) and any metadata set by the task. The name of each item consists of the full task name with . replaced by :, followed by . and the name of the item, e.g.:

topLevelTaskName:subtaskName:subsubtaskName.itemName

using : in the full task name disambiguates the rare situation that a task has a subtask and a metadata item with the same name.

getFullName() → str

Get the task name as a hierarchical name including parent task names.

Returns:
fullName : str

The full name consists of the name of the parent task and each subtask separated by periods. For example:

  • The full name of top-level task “top” is simply “top”.
  • The full name of subtask “sub” of top-level task “top” is “top.sub”.
  • The full name of subtask “sub2” of subtask “sub” of top-level task “top” is “top.sub.sub2”.
getName() → str

Get the name of the task.

Returns:
taskName : str

Name of the task.

See also

getFullName
getSchemaCatalogs() → Dict[str, Any]

Get the schemas generated by this task.

Returns:
schemaCatalogs : dict

Keys are butler dataset type, values are an empty catalog (an instance of the appropriate lsst.afw.table Catalog type) for this task.

See also

Task.getAllSchemaCatalogs

Notes

Warning

Subclasses that use schemas must override this method. The default implementation returns an empty dict.

This method may be called at any time after the Task is constructed, which means that all task schemas should be computed at construction time, not when data is actually processed. This reflects the philosophy that the schema should not depend on the data.

Returning catalogs rather than just schemas allows us to save e.g. slots for SourceCatalog as well.

getTaskDict() → Dict[str, weakref]

Get a dictionary of all tasks as a shallow copy.

Returns:
taskDict : dict

Dictionary containing full task name: task object for the top-level task and all subtasks, sub-subtasks, etc.
classmethod makeField(doc: str) → lsst.pex.config.configurableField.ConfigurableField

Make a lsst.pex.config.ConfigurableField for this task.

Parameters:
doc : str

Help text for the field.
Returns:
configurableField : lsst.pex.config.ConfigurableField

A ConfigurableField for this task.

Examples

Provides a convenient way to specify this task is a subtask of another task.

Here is an example of use:

class OtherTaskConfig(lsst.pex.config.Config):
    aSubtask = ATaskClass.makeField("brief description of task")
makeSubtask(name: str, **keyArgs) → None

Create a subtask as a new instance as the name attribute of this task.

Parameters:
name : str

Brief name of the subtask.

keyArgs

Extra keyword arguments used to construct the task. The following arguments are automatically provided and cannot be overridden:

  • “config”.
  • “parentTask”.

Notes

The subtask must be defined by Task.config.name, an instance of ConfigurableField or RegistryField.

runDataRef(dataRefList)

Run extract task on each of inputs in the dataRef list, then pass that to the solver task.

Parameters:
dataRefList : list [lsst.daf.peristence.ButlerDataRef]

Data references for exposures for detectors to process.
Returns:
results : lsst.pipe.base.Struct

The results struct containing:

outputCrosstalk

Final crosstalk calibration (lsst.ip.isr.CrosstalkCalib).

outputProvenance

Provenance data for the new calibration (lsst.ip.isr.IsrProvenance).
Raises:
RuntimeError

Raised if multiple target detectors are supplied.
timer(name: str, logLevel: int = 10) → Iterator[None]

Context manager to log performance data for an arbitrary block of code.

Parameters:
name : str

Name of code being timed; data will be logged using item name: Start and End.

logLevel

A logging level constant.

See also

timer.logInfo

Examples

Creating a timer context:

with self.timer("someCodeToTime"):
    pass  # code to time